ArtDio IPS-1000 Instrukcja Użytkownika Pobierz pdf (Strona 36)

1000 Series VoIP Gateway

Pickup the phone and dial Description

1. ##0000 To enter the configuring mode

27 8005＊50#

To delete MAC Address

MAC: 80-05-E0

The transit function is only for local calls only. You can not transit long distance and/or international calls.

6.2.4. Inbound Transit Calls

Application: While out, you can place phone calls from traditional phones to local ARTDIO IPH at home. ARTDIO IPH at home

will answer the call (requires that auto-answer be enabled) with a greeting. You then dial “# + Inbound Transit

password + # + called

ARTDIO IPH number + #”. If the password you entered is correct, your call will be

connected through the IP network.

Configuration：

(1) IP Searching must be previously completed between both ARTDIO IPHs.

(2) You must configure your password

Follow this procedure to use your phone to configure your unit’s Inbound Transit password

Pick up the handset listen for the dialing tone

1. Dial ##0000

2. Dial “23 + inbound transit password + #” (the password limited to 8 digits)

This example demonstrates configuring “123” as the inbound transit password.

Pickup the handset and dials as follows:

1. ##0000 ; to start the configuring mode

2. 23123# ; enter “123” as the inbound transit password

3. Hang up the phone

(3) The auto-answer feature of

ARTDIO IPH at home must be enabled

(The default value is “Disabled”)

Procedure for using the phone to enable the auto-answer function：

Pick up the handset and listen for the dialing tone.

1. ##0000 ; to start the configuring mode

2. 131# ; to enable auto-answer function

3. Hang up the handset.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 53 54

Brak uwag

ArtDio IPS-1000 Instrukcja Użytkownika Strona 36